removing incomplete/unused notes

5 files changed, 0 insertions, 948 deletions

diff --git a/notes/distros/centos/7/install-log.txt b/notes/distros/centos/7/install-log.txt
deleted file mode 100644
index 9133907..0000000
--- a/notes/distros/centos/7/install-log.txt
+++ /dev/null
@@ -1,679 +0,0 @@
-Starting installer, one moment...
-anaconda 21.48.22.134-1 for CentOS 7 started.
- * installation log files are stored in /tmp during the installation
- * shell is available on TTY2
- * when reporting a bug add logs from /tmp as separate text/plain attachments
-================================================================================
-================================================================================
-VNC
-
-Text mode provides a limited set of installation options. It does not offer
-custom partitioning for full control over the disk layout. Would you like to use
-VNC mode instead?
-
- 1) Start VNC
-
- 2) Use text mode
-
-  Please make your choice from above ['q' to quit | 'c' to continue |
-  'r' to refresh]: 2
-================================================================================
-================================================================================
-Installation
-
- 1) [x] Language settings                 2) [!] Time settings
-        (English (United States))                (Timezone is not set.)
- 3) [!] Installation source               4) [!] Software selection
-        (Processing...)                          (Processing...)
- 5) [!] Installation Destination          6) [x] Kdump
-        (No disks selected)                      (Kdump is enabled)
- 7) [x] Network configuration             8) [!] Root password
-        (Wired (eth0) connected)                 (Password is not set.)
- 9) [!] User creation
-        (No user will be created)
-  Please make your choice from above ['q' to quit | 'b' to begin installation |
-  'r' to refresh]: 2
-================================================================================
-================================================================================
-Time settings
-
-Timezone: not set
-
-NTP servers:
-pxe.prv.acsalaska.net (status: working)
-
- 1)  Set timezone
- 2)  Configure NTP servers
-  Please make your choice from above ['q' to quit | 'c' to continue |
-  'r' to refresh]: 1
-================================================================================
-================================================================================
-Timezone settings
-
-Available regions
- 1)  Europe                 6)  Pacific               10)  Arctic
- 2)  Asia                   7)  Australia             11)  US
- 3)  America                8)  Atlantic              12)  Etc
- 4)  Africa                 9)  Indian
- 5)  Antarctica
-Please select the timezone.
-Use numbers or type names directly [b to region list, q to quit]: 3
-================================================================================
-================================================================================
-Timezone settings
-
-Available timezones in region America
- 1)  Adak                  51)  Fort_Nelson           100) Nassau
- 2)  Anchorage             52)  Fortaleza             101) New_York
- 3)  Anguilla              53)  Glace_Bay             102) Nipigon
- 4)  Antigua               54)  Godthab               103) Nome
- 5)  Araguaina             55)  Goose_Bay             104) Noronha
- 6)  Argentina/Buenos_Ai   56)  Grand_Turk            105) North_Dakota/Beulah
-     res                   57)  Grenada               106) North_Dakota/Center
- 7)  Argentina/Catamarca   58)  Guadeloupe            107) North_Dakota/New_Sa
- 8)  Argentina/Cordoba     59)  Guatemala                  lem
- 9)  Argentina/Jujuy       60)  Guayaquil             108) Ojinaga
-10)  Argentina/La_Rioja    61)  Guyana                109) Panama
-11)  Argentina/Mendoza     62)  Halifax               110) Pangnirtung
-12)  Argentina/Rio_Galle   63)  Havana                111) Paramaribo
-     gos                   64)  Hermosillo            112) Phoenix
-13)  Argentina/Salta       65)  Indiana/Indianapoli   113) Port-au-Prince
-14)  Argentina/San_Juan         s                     114) Port_of_Spain
-15)  Argentina/San_Luis    66)  Indiana/Knox          115) Porto_Velho
-16)  Argentina/Tucuman     67)  Indiana/Marengo       116) Puerto_Rico
-17)  Argentina/Ushuaia     68)  Indiana/Petersburg    117) Punta_Arenas
-18)  Aruba                 69)  Indiana/Tell_City     118) Rainy_River
-19)  Asuncion              70)  Indiana/Vevay         119) Rankin_Inlet
-20)  Atikokan              71)  Indiana/Vincennes     120) Recife
-Press ENTER to continue
-21)  Bahia                 72)  Indiana/Winamac       121) Regina
-22)  Bahia_Banderas        73)  Inuvik                122) Resolute
-23)  Barbados              74)  Iqaluit               123) Rio_Branco
-24)  Belem                 75)  Jamaica               124) Santarem
-25)  Belize                76)  Juneau                125) Santiago
-26)  Blanc-Sablon          77)  Kentucky/Louisville   126) Santo_Domingo
-27)  Boa_Vista             78)  Kentucky/Monticello   127) Sao_Paulo
-28)  Bogota                79)  Kralendijk            128) Scoresbysund
-29)  Boise                 80)  La_Paz                129) Sitka
-30)  Cambridge_Bay         81)  Lima                  130) St_Barthelemy
-31)  Campo_Grande          82)  Los_Angeles           131) St_Johns
-32)  Cancun                83)  Lower_Princes         132) St_Kitts
-33)  Caracas               84)  Maceio                133) St_Lucia
-34)  Cayenne               85)  Managua               134) St_Thomas
-36)  Chicago               87)  Marigot               136) Swift_Current
-37)  Chihuahua             88)  Martinique            137) Tegucigalpa
-38)  Costa_Rica            89)  Matamoros             138) Thule
-39)  Creston               90)  Mazatlan              139) Thunder_Bay
-40)  Cuiaba                91)  Menominee             140) Tijuana
-41)  Curacao               92)  Merida                141) Toronto
-42)  Danmarkshavn          93)  Metlakatla            142) Tortola
-Press ENTER to continue 
-43)  Dawson                94)  Mexico_City           143) Vancouver
-44)  Dawson_Creek          95)  Miquelon              144) Whitehorse
-45)  Denver                96)  Moncton               145) Winnipeg
-46)  Detroit               97)  Monterrey             146) Yakutat
-47)  Dominica              98)  Montevideo            147) Yellowknife
-48)  Edmonton              99)  Montserrat
-49)  Eirunepe
-50)  El_Salvador
-Please select the timezone.
-Use numbers or type names directly [b to region list, q to quit]: 2
-================================================================================
-================================================================================
-Installation
-
- 1) [x] Language settings                 2) [x] Time settings
-        (English (United States))                (America/Anchorage timezone)
- 3) [x] Installation source               4) [x] Software selection
-        (http://10.0.109.254/pub_ro/dis          (Minimal Install)
-        t/centos/7/os/x86_64/)            6) [x] Kdump
- 5) [!] Installation Destination                 (Kdump is enabled)
-        (No disks selected)               8) [!] Root password
- 7) [x] Network configuration                    (Password is not set.)
-        (Wired (eth0) connected)
- 9) [!] User creation
-        (No user will be created)
-  Please make your choice from above ['q' to quit | 'b' to begin installation |
-  'r' to refresh]: 5
-================================================================================
-================================================================================
-Probing storage...
-Installation Destination
-
-[x] 1) : 32 GiB (xvda)
-
-1 disk selected; 32 GiB capacity; 32 GiB free ...
-
-  Please make your choice from above ['q' to quit | 'c' to continue |
-  'r' to refresh]: 1     
-================================================================================
-================================================================================
-Probing storage...
-Installation Destination
-
-[ ] 1) : 32 GiB (xvda)
-
-No disks selected; please select at least one disk to install to.
-
-  Please make your choice from above ['q' to quit | 'c' to continue |
-  'r' to refresh]: 1
-================================================================================
-================================================================================
-Probing storage...
-Installation Destination
-
-[x] 1) : 32 GiB (xvda)
-
-1 disk selected; 32 GiB capacity; 32 GiB free ...
-
-  Please make your choice from above ['q' to quit | 'c' to continue |
-  'r' to refresh]:  
-  Please make your choice from above ['q' to quit | 'c' to continue |
-  'r' to refresh]: c
-================================================================================
-================================================================================
-Autopartitioning Options
-
-[ ] 1) Replace Existing Linux system(s)
-
-[x] 2) Use All Space
-
-[ ] 3) Use Free Space
-
-Installation requires partitioning of your hard drive. Select what space to use
-for the install target.
-
-  Please make your choice from above ['q' to quit | 'c' to continue |
-  'r' to refresh]: c
-================================================================================
-================================================================================
-Partition Scheme Options
-
-[ ] 1) Standard Partition
-
-[ ] 2) Btrfs
-
-[x] 3) LVM
-
-[ ] 4) LVM Thin Provisioning
-
-Select a partition scheme configuration.
-
-  Please make your choice from above ['q' to quit | 'c' to continue |
-  'r' to refresh]: c
-Generating updated storage configuration
-Checking storage configuration...
-
-================================================================================
-================================================================================
-Installation
-
- 1) [x] Language settings                 2) [x] Time settings
-        (English (United States))                (America/Anchorage timezone)
- 3) [x] Installation source               4) [x] Software selection
-        (http://10.0.109.254/pub_ro/dis          (Minimal Install)
-        t/centos/7/os/x86_64/)            6) [x] Kdump
- 5) [x] Installation Destination                 (Kdump is enabled)
-        (Automatic partitioning           8) [!] Root password
-        selected)                                (Password is not set.)
- 7) [x] Network configuration
-================================================================================
-================================================================================
-Please select new root password. You will have to type it twice.
-
-Password: 
-Password (confirm): 
-================================================================================
-================================================================================
-Installation
-
- 1) [x] Language settings                 2) [x] Time settings
-        (English (United States))                (America/Anchorage timezone)
- 3) [x] Installation source               4) [x] Software selection
-        (http://10.0.109.254/pub_ro/dis          (Minimal Install)
-        t/centos/7/os/x86_64/)            6) [x] Kdump
- 5) [x] Installation Destination                 (Kdump is enabled)
-        (Automatic partitioning           8) [x] Root password
-        selected)                                (Password is set.)
- 7) [x] Network configuration
-        (Wired (eth0) connected)
- 9) [ ] User creation
-        (No user will be created)
-  Please make your choice from above ['q' to quit | 'b' to begin installation |
-  'r' to refresh]: 9
-================================================================================
-================================================================================
-User creation
-
- 1) [ ] Create user
-  Please make your choice from above ['q' to quit | 'c' to continue |
-  'r' to refresh]: 1
-================================================================================
-================================================================================
-User creation
-
- 1) [x] Create user
- 2) Fullname
- 3) Username
- 4) [ ] Use password
- 5) [ ] Administrator
- 6) Groups
-  Please make your choice from above ['q' to quit | 'c' to continue |
-  'r' to refresh]: 2
-================================================================================
-================================================================================
-Enter new value for 'Fullname' and press enter
-Operator
-================================================================================
-================================================================================
-User creation
-
- 1) [x] Create user
- 2) Fullname
-    Operator
- 3) Username
-    operator
- 4) [ ] Use password
- 5) [ ] Administrator
- 6) Groups
-  Please make your choice from above ['q' to quit | 'c' to continue |
-  'r' to refresh]: 4
-================================================================================
-================================================================================
-User creation
-
- 1) [x] Create user
- 2) Fullname
-    Operator
- 3) Username
-    operator
- 4) [x] Use password
- 5) Password
- 6) [ ] Administrator
- 7) Groups
-  Please make your choice from above ['q' to quit | 'c' to continue |
-  'r' to refresh]: 5
-================================================================================
-================================================================================
-Password: 
-Password (confirm): 
-================================================================================
-================================================================================
-User creation
-
- 1) [x] Create user
- 2) Fullname
-    Operator
- 3) Username
-    operator
- 4) [x] Use password
- 5) Password
-    Password set.
- 6) [ ] Administrator
- 7) Groups
-  Please make your choice from above ['q' to quit | 'c' to continue |
-  'r' to refresh]: 7
-================================================================================
-================================================================================
-Enter new value for 'Groups' and press enter
-
-================================================================================
-================================================================================
-User creation
-
- 1) [x] Create user
- 2) Fullname
-    Operator
- 3) Username
-    operator
- 4) [x] Use password
- 5) Password
-    Password set.
- 6) [ ] Administrator
- 7) Groups
-  Please make your choice from above ['q' to quit | 'c' to continue |
-  'r' to refresh]: c
-================================================================================
-================================================================================
-Installation
-
- 1) [x] Language settings                 2) [x] Time settings
-        (English (United States))                (America/Anchorage timezone)
- 3) [x] Installation source               4) [x] Software selection
-        (http://10.0.109.254/pub_ro/dis          (Minimal Install)
-        t/centos/7/os/x86_64/)            6) [x] Kdump
- 5) [x] Installation Destination                 (Kdump is enabled)
-        (Automatic partitioning           8) [x] Root password
-        selected)                                (Password is set.)
- 7) [x] Network configuration
-        (Wired (eth0) connected)
- 9) [x] User creation
-        (User operator will be created)
-  Please make your choice from above ['q' to quit | 'b' to begin installation |
-  'r' to refresh]: b
-================================================================================
-================================================================================
-Progress
-Setting up the installation environment
-.
-Creating disklabel on /dev/xvda
-.
-Creating xfs on /dev/xvda1
-.
-Creating lvmpv on /dev/xvda2
-.
-Creating swap on /dev/mapper/centos_10--0--109--143--pxeboot-swap
-.
-Creating xfs on /dev/mapper/centos_10--0--109--143--pxeboot-root
-.
-Running pre-installation scripts
-.
-Starting package installation process
-Preparing transaction from installation source
-Installing libgcc (1/302)
-Installing grub2-common (2/302)
-Installing grub2-pc-modules (3/302)
-Installing ncurses-base (4/302)
-Installing firewalld-filesystem (5/302)
-Installing bind-license (6/302)
-Installing kbd-misc (7/302)
-Installing tzdata (8/302)
-Installing bash (9/302)
-Installing chkconfig (10/302)
-Installing nss-softokn-freebl (11/302)
-Installing glibc-common (12/302)
-Installing ncurses (13/302)
-Installing setup (14/302)
-Installing filesystem (15/302)
-Installing basesystem (16/302)
-Installing glibc (17/302)
-Installing zlib (18/302)
-Installing nspr (19/302)
-Installing nss-util (20/302)
-Installing libcom_err (21/302)
-Installing popt (22/302)
-Installing libstdc++ (23/302)
-Installing ncurses-libs (24/302)
-Installing info (25/302)
-Installing gawk (26/302)
-Installing libsepol (27/302)
-Installing libattr (28/302)
-Installing libacl (29/302)
-Installing libcap (30/302)
-Installing libffi (31/302)
-Installing pcre (32/302)
-Installing libselinux (33/302)
-Installing sed (34/302)
-Installing grep (35/302)
-Installing p11-kit (36/302)
-Installing keyutils-libs (37/302)
-Installing gmp (38/302)
-Installing libverto (39/302)
-Installing libtasn1 (40/302)
-Installing p11-kit-trust (41/302)
-Installing ca-certificates (42/302)
-Installing centos-release (43/302)
-Installing openssl-libs (44/302)
-Installing coreutils (45/302)
-Installing krb5-libs (46/302)
-Installing xz-libs (47/302)
-Installing libuuid (48/302)
-Installing libblkid (49/302)
-Installing bzip2-libs (50/302)
-Installing libdb (51/302)
-Installing readline (52/302)
-Installing elfutils-libelf (53/302)
-Installing libxml2 (54/302)
-Installing libgpg-error (55/302)
-Installing libcap-ng (56/302)
-Installing audit-libs (57/302)
-Installing libgcrypt (58/302)
-Installing gzip (59/302)
-Installing cpio (60/302)
-Installing libnl3 (61/302)
-Installing expat (62/302)
-Installing sqlite (63/302)
-Installing lua (64/302)
-Installing findutils (65/302)
-Installing which (66/302)
-Installing diffutils (67/302)
-Installing cracklib (68/302)
-Installing libmount (69/302)
-Installing glib2 (70/302)
-Installing shared-mime-info (71/302)
-Installing file-libs (72/302)
-Installing file (73/302)
-Installing libmnl (74/302)
-Installing libcroco (75/302)
-Installing cracklib-dicts (76/302)
-Installing pam (77/302)
-Installing libpwquality (78/302)
-Installing nss-softokn (79/302)
-Installing nss-pem (80/302)
-Installing nss (81/302)
-Installing nss-sysinit (82/302)
-Installing libnl3-cli (83/302)
-Installing libassuan (84/302)
-Installing cyrus-sasl-lib (85/302)
-Installing xz (86/302)
-Installing groff-base (87/302)
-Installing libgomp (88/302)
-Installing libunistring (89/302)
-Installing libidn (90/302)
-Installing libedit (91/302)
-Installing e2fsprogs-libs (92/302)
-Installing libnfnetlink (93/302)
-Installing tcp_wrappers-libs (94/302)
-Installing lzo (95/302)
-Installing sysvinit-tools (96/302)
-Installing slang (97/302)
-Installing newt (98/302)
-Installing ethtool (99/302)
-Installing lz4 (100/302)
-Installing jansson (101/302)
-Installing gdbm (102/302)
-Installing python-libs (103/302)
-Installing python (104/302)
-Installing python-decorator (105/302)
-Installing hostname (106/302)
-Installing pciutils-libs (107/302)
-Installing libselinux-python (108/302)
-Installing python-slip (109/302)
-Installing pyliblzma (110/302)
-Installing python-linux-procfs (111/302)
-Installing newt-python (112/302)
-Installing yum-metadata-parser (113/302)
-Installing python-schedutils (114/302)
-Installing python-perf (115/302)
-Installing python-configobj (116/302)
-Installing python-iniparse (117/302)
-Installing pyxattr (118/302)
-Installing libnetfilter_conntrack (119/302)
-Installing iptables (120/302)
-Installing iproute (121/302)
-Installing gettext-libs (122/302)
-Installing gettext (123/302)
-Installing less (124/302)
-Installing libteam (125/302)
-Installing nss-tools (126/302)
-Installing ipset-libs (127/302)
-Installing ipset (128/302)
-Installing pkgconfig (129/302)
-Installing gobject-introspection (130/302)
-Installing python-gobject-base (131/302)
-Installing libdb-utils (132/302)
-Installing grubby (133/302)
-Installing kmod-libs (134/302)
-Installing linux-firmware (135/302)
-Installing logrotate (136/302)
-Installing binutils (137/302)
-Installing alsa-lib (138/302)
-Installing centos-logos (139/302)
-Installing fipscheck (140/302)
-Installing fipscheck-lib (141/302)
-Installing libssh2 (142/302)
-Installing libcurl (143/302)
-Installing curl (144/302)
-Installing rpm-libs (145/302)
-Installing rpm (146/302)
-Installing openldap (147/302)
-Installing libuser (148/302)
-Installing python-pycurl (149/302)
-Installing python-urlgrabber (150/302)
-Installing mariadb-libs (151/302)
-Installing vim-minimal (152/302)
-Installing libselinux-utils (153/302)
-Installing tar (154/302)
-Installing acl (155/302)
-Installing make (156/302)
-Installing openssl (157/302)
-Installing pinentry (158/302)
-Installing mozjs17 (159/302)
-Installing snappy (160/302)
-Installing libss (161/302)
-Installing GeoIP (162/302)
-Installing bind-libs-lite (163/302)
-Installing hardlink (164/302)
-Installing freetype (165/302)
-Installing sg3_utils-libs (166/302)
-Installing kernel-tools-libs (167/302)
-Installing libndp (168/302)
-Installing libseccomp (169/302)
-Installing libdaemon (170/302)
-Installing qrencode-libs (171/302)
-Installing libaio (172/302)
-Installing device-mapper-persistent-data (173/302)
-Installing ustr (174/302)
-Installing libsemanage (175/302)
-Installing shadow-utils (176/302)
-Installing libutempter (177/302)
-Installing procps-ng (178/302)
-Installing kpartx (179/302)
-Installing device-mapper (180/302)
-Installing util-linux (181/302)
-Installing dracut (182/302)
-Installing kmod (183/302)
-Installing device-mapper-libs (184/302)
-Installing cryptsetup-libs (185/302)
-Installing elfutils-libs (186/302)
-Installing systemd-libs (187/302)
-Installing dbus-libs (188/302)
-Installing systemd (189/302)
-Installing dbus (190/302)
-Installing elfutils-default-yama-scope (191/302)
-Installing polkit (192/302)
-Installing polkit-pkla-compat (193/302)
-Installing iputils (194/302)
-Installing initscripts (195/302)
-Installing systemd-sysv (196/302)
-Installing device-mapper-event-libs (197/302)
-Installing grub2-tools-minimal (198/302)
-Installing policycoreutils (199/302)
-Installing hwdata (200/302)
-Installing cronie-anacron (201/302)
-Installing cronie (202/302)
-Installing crontabs (203/302)
-Installing os-prober (204/302)
-Installing grub2-tools (205/302)
-Installing dhcp-libs (206/302)
-Installing NetworkManager-libnm (207/302)
-Installing openssh (208/302)
-Installing dhcp-common (209/302)
-Installing dhclient (210/302)
-Installing dracut-network (211/302)
-Installing grub2-tools-extra (212/302)
-Installing grub2-pc (213/302)
-Installing libpciaccess (214/302)
-Installing libdrm (215/302)
-Installing selinux-policy (216/302)
-Installing device-mapper-event (217/302)
-Installing lvm2-libs (218/302)
-Installing wpa_supplicant (219/302)
-Installing NetworkManager (220/302)
-Installing fxload (221/302)
-Installing alsa-firmware (222/302)
-Installing alsa-tools-firmware (223/302)
-Installing ebtables (224/302)
-Installing teamd (225/302)
-Installing dbus-glib (226/302)
-Installing dbus-python (227/302)
-Installing python-slip-dbus (228/302)
-Installing python-firewall (229/302)
-Installing python-pyudev (230/302)
-Installing plymouth-core-libs (231/302)
-Installing plymouth-scripts (232/302)
-Installing plymouth (233/302)
-Installing libestr (234/302)
-Installing lsscsi (235/302)
-Installing libfastjson (236/302)
-Installing numactl-libs (237/302)
-Installing libpipeline (238/302)
-Installing dmidecode (239/302)
-Installing virt-what (240/302)
-Installing pth (241/302)
-Installing gnupg2 (242/302)
-Installing rpm-build-libs (243/302)
-Installing rpm-python (244/302)
-Installing gpgme (245/302)
-Installing pygpgme (246/302)
-Installing yum-plugin-fastestmirror (247/302)
-Installing yum (248/302)
-Installing kbd-legacy (249/302)
-Installing kbd (250/302)
-Installing tuned (251/302)
-Installing man-db (252/302)
-Installing irqbalance (253/302)
-Installing rsyslog (254/302)
-Installing iprutils (255/302)
-Installing firewalld (256/302)
-Installing NetworkManager-team (257/302)
-Installing NetworkManager-tui (258/302)
-Installing lvm2 (259/302)
-Installing selinux-policy-targeted (260/302)
-Installing grub2 (261/302)
-Installing kexec-tools (262/302)
-Installing openssh-server (263/302)
-Installing openssh-clients (264/302)
-Installing lshw (265/302)
-Installing authconfig (266/302)
-Installing audit (267/302)
-Installing postfix (268/302)
-Installing kernel (269/302)
-Installing microcode_ctl (270/302)
-Installing aic94xx-firmware (271/302)
-Installing biosdevname (272/302)
-Installing chrony (273/302)
-Installing parted (274/302)
-Installing dracut-config-rescue (275/302)
-Installing kernel-tools (276/302)
-Installing sg3_utils (277/302)
-Installing e2fsprogs (278/302)
-Installing sudo (279/302)
-Installing passwd (280/302)
-Installing btrfs-progs (281/302)
-Installing xfsprogs (282/302)
-Installing libsysfs (283/302)
-Installing iwl2030-firmware (284/302)
-Installing iwl105-firmware (285/302)
-Installing iwl135-firmware (286/302)
-Installing iwl2000-firmware (287/302)
-Installing iwl3945-firmware (288/302)
-Installing iwl5000-firmware (289/302)
-Installing iwl7260-firmware (290/302)
-Installing ivtv-firmware (291/302)
-Installing iwl6050-firmware (292/302)
-Installing iwl100-firmware (293/302)
-Installing iwl3160-firmware (294/302)
-Installing iwl6000g2a-firmware (295/302)
-Installing rootfiles (296/302)
-Installing iwl7265-firmware (297/302)
-Installing iwl1000-firmware (298/302)
-Installing iwl6000-firmware (299/302)
-Installing iwl4965-firmware (300/302)
-Installing iwl6000g2b-firmware (301/302)
-Installing iwl5150-firmware (302/302)
-Performing post-installation setup tasks
-
-[anaconda] 1:main* 2:shell  3:log  4:storage-lo> Switch tab: Alt+Tab | Help: F1 
-
-
diff --git a/notes/migrations/fixedwireless/2018-11-27/basestations.md b/notes/migrations/fixedwireless/2018-11-27/basestations.md
deleted file mode 100644
index 2e92baa..0000000
--- a/notes/migrations/fixedwireless/2018-11-27/basestations.md
+++ /dev/null
@@ -1,8 +0,0 @@
-
-Base Stations
-=============
-
-   * 0288M-31-003
-     - IP Address; 172.25.192.3
-     - Street:     6500 Chena Hot Springs Rd, Fairbanks
-
diff --git a/notes/servers/cwc.prv.nas31/mdadm-build-nas31.sh b/notes/servers/cwc.prv.nas31/mdadm-build-nas31.sh
deleted file mode 100644
index 8df9f79..0000000
--- a/notes/servers/cwc.prv.nas31/mdadm-build-nas31.sh
+++ /dev/null
@@ -1,165 +0,0 @@
-#!/bin/bash
-
-echo 30000 > /proc/sys/dev/raid/speed_limit_max
-
-
-mdadm --zero-superblock /dev/sd[c-z]1
-mdadm --zero-superblock /dev/sda[a-l]1
-
-
-sgdisk --zap-all /dev/sdc
-sgdisk \
-   -n 1:2048:7809796095 \
-   -t 1:fd00 \
-   /dev/sdc
-gdisk  -l /dev/sdc
-partprobe /dev/sdc
-
-
-sgdisk /dev/sdc -R /dev/sdd
-sgdisk /dev/sdc -R /dev/sde
-sgdisk /dev/sdc -R /dev/sdf
-sgdisk /dev/sdc -R /dev/sdg
-sgdisk /dev/sdc -R /dev/sdh
-sgdisk /dev/sdc -R /dev/sdi
-sgdisk /dev/sdc -R /dev/sdj
-sgdisk /dev/sdc -R /dev/sdk
-sgdisk /dev/sdc -R /dev/sdl
-sgdisk /dev/sdc -R /dev/sdm
-sgdisk /dev/sdc -R /dev/sdn
-sgdisk /dev/sdc -R /dev/sdo
-sgdisk /dev/sdc -R /dev/sdp
-sgdisk /dev/sdc -R /dev/sdq
-sgdisk /dev/sdc -R /dev/sdr
-sgdisk /dev/sdc -R /dev/sds
-sgdisk /dev/sdc -R /dev/sdt
-sgdisk /dev/sdc -R /dev/sdu
-sgdisk /dev/sdc -R /dev/sdv
-sgdisk /dev/sdc -R /dev/sdw
-sgdisk /dev/sdc -R /dev/sdx
-sgdisk /dev/sdc -R /dev/sdy
-sgdisk /dev/sdc -R /dev/sdz
-sgdisk /dev/sdc -R /dev/sdaa
-sgdisk /dev/sdc -R /dev/sdab
-sgdisk /dev/sdc -R /dev/sdac
-sgdisk /dev/sdc -R /dev/sdad
-sgdisk /dev/sdc -R /dev/sdae
-sgdisk /dev/sdc -R /dev/sdaf
-sgdisk /dev/sdc -R /dev/sdag
-sgdisk /dev/sdc -R /dev/sdah
-sgdisk /dev/sdc -R /dev/sdai
-sgdisk /dev/sdc -R /dev/sdaj
-sgdisk /dev/sdc -R /dev/sdak
-sgdisk /dev/sdc -R /dev/sdal
-
-
-partprobe /dev/sdd
-partprobe /dev/sde
-partprobe /dev/sdf
-partprobe /dev/sdg
-partprobe /dev/sdh
-partprobe /dev/sdi
-partprobe /dev/sdj
-partprobe /dev/sdk
-partprobe /dev/sdl
-partprobe /dev/sdm
-partprobe /dev/sdn
-partprobe /dev/sdo
-partprobe /dev/sdp
-partprobe /dev/sdq
-partprobe /dev/sdr
-partprobe /dev/sds
-partprobe /dev/sdt
-partprobe /dev/sdu
-partprobe /dev/sdv
-partprobe /dev/sdw
-partprobe /dev/sdx
-partprobe /dev/sdy
-partprobe /dev/sdz
-partprobe /dev/sdaa
-partprobe /dev/sdab
-partprobe /dev/sdac
-partprobe /dev/sdad
-partprobe /dev/sdae
-partprobe /dev/sdaf
-partprobe /dev/sdag
-partprobe /dev/sdah
-partprobe /dev/sdai
-partprobe /dev/sdaj
-partprobe /dev/sdak
-partprobe /dev/sdal
-
-
-mdadm \
-   --create /dev/md60 \
-   --name md_cwc.prv.nas31_md60 \
-   --level 6 \
-   --raid-devices 8 \
-   --spare-devices 1 \
-   --chunk 512 \
-   /dev/sd[c-k]1
-
-
-mdadm \
-   --create /dev/md61 \
-   --name md_cwc.prv.nas31_md61 \
-   --level 6 \
-   --raid-devices 8 \
-   --spare-devices 1 \
-   --chunk 512 \
-   /dev/sd[l-t]1
-
-
-mdadm \
-   --create /dev/md62 \
-   --name md_cwc.prv.nas31_md62 \
-   --level 6 \
-   --raid-devices 8 \
-   --spare-devices 1 \
-   --chunk 512 \
-   /dev/sd[u-z]1 \
-   /dev/sda[a-c]1
-
-
-mdadm \
-   --create /dev/md63 \
-   --name md_cwc.prv.nas31_md63 \
-   --level 6 \
-   --raid-devices 8 \
-   --spare-devices 1 \
-   --chunk 512 \
-   /dev/sda[d-l]1
-
-
-mdadm \
-   --create /dev/md1 \
-   --name md_cwc.prv.nas31_data \
-   --level 0 \
-   --raid-devices 4 \
-   --chunk 512 \
-   /dev/md6[0-3]
-
-
-co -l        /etc/mdadm.conf
-mdadm -Es >> /etc/mdadm.conf
-vi           /etc/mdadm.conf
-ci -u        /etc/mdadm.conf
-
-
-pvcreate                                       /dev/md1
-vgcreate                 vg_cwc.prv.nas31_data /dev/md1
-lvcreate -L 18t -n sdwan vg_cwc.prv.nas31_data
-mkfs.ext4 \
-   -L sdwan \
-   -T largefile4 \
-   -m 1 \
-   /dev/mapper/vg_cwc.prv.nas31_data-sdwan
-
-
-mkdir -p /vol/sdwan
-cof /etc/fstab
-
-
-acs-grub.sh
-
-
diff --git a/notes/services/ceph/build-requirements.md b/notes/services/ceph/build-requirements.md
deleted file mode 100644
index d0e85ed..0000000
--- a/notes/services/ceph/build-requirements.md
+++ /dev/null
@@ -1,51 +0,0 @@
-Ceph Build Requirements
-=======================
-
-   [X] ccache
-   [ ] python/sphinx-doc
-   [ ] python/pthon2-typing
-   [X] devel/babeltrace
-   [X] devel/git
-   [X] devel/gperf
-   [X] devel/gmake
-   [X] devel/cmake
-   [X] devel/yasm
-   [ ] devel/boost-all
-   [ ] devel/boost-python-libs
-   [ ] devel/valgrind
-   [ ] devel/pkgconf
-   [ ] devel/libedit
-   [X] devel/libtool
-   [ ] devel/google-perftools
-   [ ] lang/cython
-   [ ] devel/py-virtualenv
-   [ ] databases/leveldb
-   [X] net/openldap-client
-   [X] security/nss
-   [ ] security/cryptopp
-   [ ] archivers/snappy
-   [X] ftp/curl
-   [ ] misc/e2fsprogs-libuuid
-   [X] misc/getopt
-   [ ] net/socat
-   [X] textproc/expat2
-   [X] textproc/gsed
-   [X] textproc/libxml2
-   [ ] textproc/xmlstarlet
-   [ ] textproc/jq
-   [ ] textproc/py-sphinx
-   [X] emulators/fuse
-   [ ] java/junit
-   [X] lang/python
-   [X] lang/python27
-   [ ] devel/py-pip
-   [ ] devel/py-argparse
-   [ ] devel/py-nose
-   [ ] devel/py-prettytable
-   [ ] www/py-flask
-   [ ] www/fcgi
-   [ ] sysutils/flock
-   [ ] sysutils/fusefs-libs
-   [ ] pip install pecan
-
-
diff --git a/notes/services/fixedwireless/RADWIN-Manager.txt b/notes/services/fixedwireless/RADWIN-Manager.txt
deleted file mode 100644
index 78a160a..0000000
--- a/notes/services/fixedwireless/RADWIN-Manager.txt
+++ /dev/null
@@ -1,45 +0,0 @@
-
-Base Stations
-=============
-
-Credentials
------------
-
-   * SNMP String: R4dw1n
-   * User:        Installer
-   * Pass:        wireless
-
-
-Settings
---------
-
-   * System:
-     - Name:   <matches LDAP>
-     
-   * RADIUS
-     - [X] Enabe Authorization Mode
-     - [ ] Install Confirmation Required
-     - [X] Enable HSU Accounting Mode
-
-     - Ethernet
-       - Advanced
-          - [X] Broadcast flooding protection limit [%][ 6 ]
-          - [X] Multicast flooding protection limit [%] [ 6 ]
-          - [X] DHCP Relay Agent (Option 82)
-          - Circuit-ID source: HBS Name
-          - Remote-ID source:  HSU Name  [X] Concatenate into Circuit-ID field
-
-     - RADIUS Servers
-       - 172.25.121.224
-       - 172.25.121.225
-
-     - Service Categories
-       - Residential1  1.0     1.0     CIR     [ ] 0.0     [ ] 0.0     No Filtering
-       - Residential2  1.0     1.0     CIR     [ ] 0.0     [ ] 0.0     No Filtering
-       - Residential3  1.0     1.0     CIR     [ ] 0.0     [ ] 0.0     No Filtering
-       - Residential4  1.0     1.0     CIR     [ ] 0.0     [ ] 0.0     No Filtering
-       - Business1     1.0     1.0     CIR     [ ] 0.0     [ ] 0.0     No Filtering
-       - Business2     1.0     1.0     CIR     [ ] 0.0     [ ] 0.0     No Filtering
-       - Business3     1.0     1.0     CIR     [ ] 0.0     [ ] 0.0     No Filtering
-       - Business4     1.0     1.0     CIR     [ ] 0.0     [ ] 0.0     No Filtering
-